. PRETTYCARE R1 MAX Robot Vacuum Cleaner User Manual
Размер шрифта:
PRETTYCARE R1 MAX Robot Vacuum Cleaner User Manual

PRETTYCARE R1 MAX Robot Vacuum Cleaner User Manual

Play

Без кейворда

User Manuals Simplified.

Home » PRETTYCARE » PRETTYCARE R1 MAX Robot Vacuum Cleaner User Manual

Robot Vacuum CleanerR1 MAXUser Manual

Thank you for choosing PRETTYCARE robot vacuum cleaner

Contents hide Important Safety Instructions

Warning

  • This product is only used for floor cleaning in the home environment, do not use it outdoors (such as open balconies), non-floor (such as sofas), commercial or industrial environments
  • Do not use it in a suspended environment (such as duplex floors, open balconies, furniture tops) without guardrails
  • Do not use or deposit in environments above 40°C, below 0°C, or in environments with any liquid and sticky substances on the ground
  • Please hang up the ground cables at home before use to avoid dragging the cables when the vacuum cleaner is running.
  • Please put away fragile items and sundries (such as vases, plastic bags, etc.) placed on the ground to avoid damage to valuables at home when the vacuum cleaner is blocked or slightly collided during operation
  • Do not allow persons with physical, mental or sensory disabilities, including children, to use or operate this product.
  • Do not use with damaged cord or plug. Do not use any other power supply cord. For replacement cords, please contact Customer Care to ensure proper selection of country specific power supply cord.
  • Do not let children use the robot as a toy. Please supervise children and pets to keep them away when the it is working.
  • Do not place the main brush cleaning tool in an area that can be touched by children.
  • Do not place any objects (including children, pets) on the stationary or moving main unit.
  • Do not sit or stand on the vacuum cleaner.
  • Do not let human or pet hair, fingers and other parts close to the vacuum port of the machine when the it is working.
  • Do not use to sweep any burning objects (such as unextinguished cigarette butts)
  • Do not use for cleaning long-haired carpets (some dark-colored carpets may not be cleaned properly)
  • Do not let the vacuum cleaner pick up foreign objects or sharp objects (such as decoration waste, glass, iron nails, etc.)
  • Do not use the protective cover of the laser ranging sensor, the upper cover of the main unit and the collision buffer as a handle to carry the machine.
  • Do not clean or maintain the main unit and the charging stand when the power is turned off or off.
  • Use only manufacturer’s recommended attachments.
  • Do not wipe any part of this product with a damp cloth or any liquid.
  • Please let all filters air-dry completely before reinstalling them to prevent liquid from being drawn into electric parts.
  • Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
  • Prevent unintentional staring. Ensure the switch is the off-position before connecting to battery pack, picking up or carrying the application.Carrying the application with your finger on the switch or energizing application that have the switch on invites accidents.
  • Do not handle charger, including charger plug, and charger terminals with wet hands.
  • Do not use without dust bag.
  • For use only with PRETTYCARE R1 MAX charger. Recharge only with the charger specified by the manufacturer.A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
  • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
  • Turn off the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
  • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
  • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
  • DO NOT use in the following areas: a) Wet or damp surfaces.b) Outdoor areas near fireplaces with unobstructed entrances.c) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or. flammable dust).d) In an area with a space heater.e) Near fireplaces with unobstructed entrances.
  • DO NOT use if robotic vacuum cleaner not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C (266°F) may cause explosion.
  • Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
  • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
  • Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
  • Place the cords from other appliances out of the area to be cleaned.
  • LASER WARNING: THIS PRODUCT HAS A CLASS 1 LASER. IT IS SAFE UNDER REASONABLY FORESEEABLE CONDITIONS (AS DEFINED IN THESE INSTRUCTIONS.) ALWAYS TURN OFF THE POWER BEFORE LIFTING THE ROBOTIC VACUUM CLEANER OR PERFORMING ANY MAINTENANCE ON IT. DO NOT LOOK DIRECTLY INTO LASER.
  • Please use this product in accordance with the instructions in the manual, any loss and injury caused by improper use shall be borne by the user.
  1. BatteryImportant: batteries and products containing batteries are subject to strict transport regulations. If the product (including batteries) needs to be transported for long-term storage, travel, or any other reason, the following shipping instructions must be followed:• Remove the battery from the robot.• Apply a piece of insulating tape to the electrodes of the battery.• Reinsert the battery with the tape and close the battery cover.• When shipping, pack the product in its original packaging or suitable packaging.• Can only be shipped by land, not by air.
  2. Storage battery• If the product needs to be stored for a long time, please remove the battery first.• Battery removal steps:① Turn the machine over to the back.② Use a screwdriver or other suitable tool to remove the two battery cover screws.③ Take out the battery cover.④ Take out the battery.• Store the product and battery in a cool, dry place.
  3. Remove the battery• Before disposing of the appliance, the battery must be removed from the appliance.• The appliance must be switched off when removing the battery.• Batteries should be disposed of safely.
Product List Product Introduction

Main Body

Note: Press any key to stop during cleaning or recharging. Charging Station

Installation & Start
  1. Tidy cables and loose items from the ground and move any unstable, fragile, or dangerous objects to prevent personal injury or property damage due to things becoming tangled in, steuck by, or knocked over by the robot
  2. If using this robot in raised areas(e.g. balconies, stairs, etc.), always use a safe physical barrier to prevent accidental falls that could lead to personal injury.

Note:When using the robot for the first time. follow it throughout its whole cleaning route and watch for major obstacles.The robot will be able to clean by itseif in future uses.

  1. Press the station board up to the slots on both sides of the station. When you hear a click, it is installed in place, and then press other positions slightly to ensure the base plate is completely attached to the ground.
  2. lace the base station against wall on flat floor in an area with good Wi-Fi coverage. Make sure there is at least 1.6ft/0.5m of space on both sides and at least 4ft/1.2m of space in front and WiFi signal is in good condition and then turn on the power.
  3. After placing the clean water tank, dirty water tank and dust bag according to instruction, plug in the power cord. After the base station is powered on. the white indicator light will be always on.Tips: The Clean Water Tank needs to be filled with water manually.
  • Long pressing the button to turn on the robot and the blue light breathes and the robot enters the boot process. When the blue light is always on, then the boot is completed.
  • When the robot is in standby, press and hold the button to shut down. When the light is off, then the shutdown is completed.
  • Please fully charge the robot when you use it for the first time. It takes about 5~6 hours to fully charge.
  • In order to facilitate the return of the robot to the base station, please let the robot start from the base station, and do not move the base station.
  • Please ensure that there is at least 1.6ft/0.5m of space on either side of the base station and at least 4ft/1.2m of space in front of the base station.
  • When the power of the robot is low and cannot be turned on, please manually put the robot directly into the base station for charging.
  • To maintain battery performance, keep the robot charged during daily use.
Connect to the App

Download the APP(1)Scan the QR code or search for “PE HOME” in “APP Store” or “google play” to download the APP. https://app.ankobot.com:8143/web/app/downloadPRETTYCARE.html(2) Press and hold the button and button of the robot vacuum at the same time for 3S to enter the network connection mode, the button light flashes slowly and there is a voice prompt. Tip:If you have any problems with the process, please feel free to contact PRETTYCARE Service Support.(3)Enter the home page of APP, click “+” in the upper right corner and add device according to the APP prompt. The device will show in the home page list after successfully added.

Instructions
  • Sweeping mode: the robot enters sweeping mode, automatically returns to the base station to empty dust after cleaning.
  • Mopping mode: the robot enters mopping mode, automatically returns to the base station after the mopping.
  • Sweeping and Mopping mode: the robot enters sweeping and mopping mode, automatically returns to the base station to empty dust and then clean the mop.

Note:The robot will enter drying mode after each cleaning.(The drying time takes about two hours,and if you want to pause or abort the drying, press the Drying Button on the base station)Note:

  • If the power is too low, the cleaning task cannot be performed, please charge it before starting the cleaning;
  • If the power is too low during cleaning, the robot returns to the charging dock for recharge and resumes cleaning where it left off.

(2) Scheduled CleaningSet the scheduled cleaning time on APP. The robot will automatically start cleaning at the time you set and return to the charging base after cleaning.Note:During the scheduled cleaning period, the robot will not automatically renew the cleaning and prompt.(3) Smart Area

  1. Area CleaningAfter Smart Map generated successfully, you can add an adjustable size and location cleaning area. The robot will only clean the selected area.
  2. Designated Room CleaningAfter Smart Map generated successfully, you can divide the map into different areas according the cleaning needs. You can set one or more cleaning areas. The robot will only clean the selected area.
  3. No-go ZoneYou can set areas you don’t need to clean or don’t want it to enter as “no-go areas” via the app (e.g. bathrooms, areas you don’t want to disturb, areas with wires and fragile items on the floor, etc.) and the vacuum robot won’t enter the no-go areas.
  • Please make sure the robot has generated the smart map. The No-go zone will be lost when the map is rebuilt.
  • The No-go zone may be lost due to changes in the location of the self-empty station or furniture. So please try not to move or interfere with the Robot while it is working.
  1. When the robot performs the cleaning task of sweeping and mopping, in order to ensure the cleanliness of the mop, it will periodically return to the base station to clean the mop and replenish the water in the robot’s water tank.
  2. After the cleaning task is over, the robot will automatically return to the base station for dust collection, mop cleaning, water injection and drying operations.

Tips ：The robot will automatically switch on drying when it enters the base station (no need to press the drying button manually), if you need to pause, you can press the drying button.Base station self-cleaningTap the self-cleaning button on the base station to activate the self-cleaning function of the base station. When the base station is self-cleaning, please use the cleaning brush to assist in cleaning the base station cleaning slot. Tip: When you press to start base station self-cleaning, the robot will automatically leave the base station for 1 minute to allow the station to complete its self-clean.

Maintenance

Accessories Cleaning and MaintenanceIn order to maintain the normal operation of the robot vacuum, it’s recommended to clean and maintain the robot vacuum regularly. Please turn off the power of the robot vacuum during cleaning and maintenance. Refer to the table below for the frequency of cleaning and maintenance of accessories:

Maintenance Dust BoxTake out the dust box, open the dust box cover, and dump the garbage. Cleaning Filters( 1 )Take the filters out from the dust box. (2) Claen the primary filter, HEPA, sponge by fresh water. (3) Put the primary filter, HEPA and sponge back together in the dust bin. Cleaning Main BrushRemove the roller brush cover and take out the roller brush. If there is a lot of dust in the suction port, please use a rag to clean the roller brush compartment and the roller brush. If there are hairs entangled in the brush, please use the upper blade of the cleaning tool to cut it off. Cleaning Side BrushAfter removing the side brush, use use the upper blade of the cleaning tool to clean the side brush and wipe with a cloth. Cleaning Universal WheelClean the universal wheel with a cloth. Cleaning Anti-fall sensorUse a dry cloth to clean cliff sensors to ensure the sensitivity. Cleaning Base Station *recommended monthly cleaningClean the base station with a cleaning brush Firmware UpgradeThe robot firmware can be upgraded through the APP. When upgrading, please ensure that the robot is in a charged state and has a certain amount of power. The indicator light flashes when the firmware is upgraded.ResetIf the system still cannot be used normally after resetting the system, please poke the reset hole under the flip cover in the power-on state to turn off the robot, then press and hold the button to restart the robot.

Product parameters

Packing List

Robot

Charging Base Station

Troubleshooting

FCC Caution:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

📎📎📎📎📎📎📎📎📎📎